If you have a loose mirror-back-on-ball-mount/” title=”How To Put Rear View Mirror Back On Ball Mount”>rear view mirror ball joint, it can be a nuisance and even dangerous. Fortunately, fixing a loose rear view mirror ball joint is fairly simple and can be done in just a few steps. With the right tools and supplies, you can quickly tighten the joint and restore your rear view mirror to its original position.1. Begin by unscrewing the retaining nut at the base of the mirror.
2. Once the nut is unscrewed, carefully pull away from the mount and remove the mirror from its housing.
3. Disconnect the wiring harness, if applicable, and set aside.
4. With a small pair of pliers or needle-nose, carefully remove any remaining pieces of the broken ball joint from inside the mount.
5. Insert a new ball joint into the mount and secure it using a small drop of super glue to hold it in place while you reassemble.
6. Reconnect any wiring harnesses, if applicable, and reattach your mirror to its housing with its original retaining nut or a new one if needed.
7. Tighten all connections and make sure that your mirror is secure before using it again.
What Tools You Need to Fix a Loose Rear View Mirror Ball Joint
Fixing a loose rear view mirror ball joint is an easy job that requires a few basic tools. To start, you’ll need some screwdrivers, pliers, and a wrench. Depending on the type of mirror mount your vehicle has, you may also need some additional tools such as an adjustable wrench or socket set. Once you have all the necessary tools, you’ll be able to complete the job with minimal effort.
First, locate the mounting screws for your rear view mirror and remove them using the appropriate screwdriver. Once removed, the mirror should come free from its mount and will be ready for repair. Next, use your pliers to loosen any screws or bolts that may be holding the ball joint in place. You may also need to use an adjustable wrench or socket set to access any hidden screws or bolts.
Once all of the screws and bolts are removed, you can then inspect the ball joint for any signs of damage or wear and tear. If there is no visible damage, then simply reattach it to its mount using the appropriate screws and bolts and tighten them securely with your wrench or socket set.
If there is visible damage, then you’ll need to replace the entire ball joint assembly with a new one before reattaching it to its mount. After replacing it, make sure that all of the screws and bolts are securely tightened before testing out your new rear view mirror assembly. With just a few simple tools and some basic know-how, you can easily repair a loose rear view mirror ball joint in no time!
